Pixel Stripe Modules
product code: AI8-LIN
The Astera LED stripe module adds emotion to architectural installations and illuminated furniture. It's 8 pixels can form large setups when connected in a chain and controlled by DMX or Artnet controllers. Its modular design makes it the perfect design element for walls and ceilings. It also has a low mounting height and is easy to install. The standardized interface offers optimum connections for external controllers such as DMX and media-controls.
| Pixels : |
8 |
| Dimension |
250mm x 10 mm |
l pitch :
|
31,25 mm |
Power supply :
|
24V DC |
Power Consumption :
|
5 W maximum / 3 W calibrated with automatic white |
| LED-features : |
8x 3-in-1 RGB LEokD, 8x White LEDs, Nichia® Type, NSSM016DT |
| Light distribution : |
Lambertian |
Radiation angle :
|
120°
|
- White LEDs are automatically calculated. So they are transparent to the user, and enhance the color performance
- Integrated solution with the Artnet controller/power-supply
- Easy wiring - no need to set addresses manually, simply connect in a chain
- The stripe can be separated into two parts. The two parts can then be interconnected with a flat wire again, or only the first part can be used standalone.
- The Pixel-Stripes can be connected to a special controller/power supply with 4-pin wire.
- Optionally, they can be directly connected to DMX512 and 24V DC by using a special adapter PCB.
- A maximum of 21 stripes can be connected in series.
- The stripe can be separated into two parts. Then either a flat-wire can be used to connect them again like on the picture below, or only the left half can be used standalone. The microcontroller will detect this condition and only provide 4 pixels instead of the usual 8.
