Wireless DMX Transmitter
product code: ART3
The Wireless DMX Receiver & Transmitter is a versatile product that can be used in several ways to form large wireless lighting setups. Use it as a plain W-DMX transmitter to bridge the gap between a DMX controller and its lamps. Connect it to third party DMX lamps and use the Astera RF Remote Control to control them. Connect it to a DMX light control system so it can control color and intensity of any Astera lamp conveniently from your DMX control board.
| TECHNICAL SPECIFICATIONS |
| Working Voltage: | Input-110-240V, 50/60Hz |
| Battery: | n/a |
| Output Socket: | 2 x XLR 3-pole (in & out) |
| DMX Capability: | DMX-512 in/out |
| Channels: | 512 |
| Wireless Module: | 868MHz receiver with up to 300m range (USA version: 902-928MHz / 330yd) |
| Range: |
Up to 300m (330yd) |
| Control Pad: | 5 multi-functional buttons and LCD display for basic operation |
| Environment: | Indoor and dry Outdoor |
| Unit Size: | L160mm x W105mm x H50mm (L6.3” x W4.1” x H2.0”) |
| Weight: | 0.850kg (1.9lb) |
| Housing: | Aluminum |
| Modes: | Sending, receiving, transmitting |
| Functions: | Group addressing, Chain addressing, Type addressing, Serial Number addressing |
| Included Accessories: |
Power Cord for the integrated power supply, loop-screws for truss attachment |
| COMPATIBLE CONTROLLERS |
| COMPATIBLE LAMPS |
| OPERATION MODES |
| Description |
Astera's Wireless DMX Transmitter can send and receive Wireless DMX data in a range of up to 300m. It enables Astera's wireless lamps to be controlled by a DMX control table but also enable lamps from other manufacturers to be controlled wirelessly over DMX or by the Astera Remote Control.
The Radio-Frequency W-DMX Transmitter is compatible with all standard DMX lamps and DMX Control Tables. The setup is quick and easy and most Wireless DMX setups can be created with just a few clicks. Several third-party lamps can be chain-attached to the Cordless DMX Transmitter and in total a whole DMX Universe can be connected to the DMX Transmitter.
Adjustments can be set with the integrated control panel that also allows basic operation with no DMX signal in reach. Pre-set programs can be combined with customized colors to enable easy controlling of the connected lamps.
The wide range and numerous functions of the Wireless DMX Transmitter are driven by a sophisticated software that has been developed over the past years by industy-leading engineers in Germany. The DMX protocol is compressed into small packages so that a large amnount of data can be sent on 868 or 915MHz bandwith.
